U.S. Market for Dental Prosthetics and CAD/CAM Devices - KPLC 7 News, Lake Charles, Louisiana

U.S. Market for Dental Prosthetics and CAD/CAM Devices

Information contained on this page is provided by an independent third-party content provider. WorldNow and this Station make no warranties or representations in connection therewith. If you have any questions or comments about this page please contact pressreleases@worldnow.com.

SOURCE Reportlinker

NEW YORK, April 28, 2014 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:

U.S. Market for Dental Prosthetics and CAD/CAM Devices

http://www.reportlinker.com/p01093082/US-Market-for-Dental-Prosthetics-and-CAD/CAM-Devices.html

Abstract:

This report measures and evaluates the U.S. market for crowns, bridges, inlays/onlays, veneers and dentures. These devices are classified as dental restorations. In dentistry, prosthetics are used for restoring damaged teeth or replacing a whole tooth, a set of teeth or a full dentition.

Scope of Report:
This report pertains to a forecast period of 10 years (2010 – 2020) for the US market

Report Includes
-U.S. MARKET FOR DENTAL PROSTHETICS
-GROWTH TRENDS BY SEGMENT
- CROWN AND BRIDGE MARKET
-INLAY/ONLAY MARKET
-VENEER MARKET
- DENTURE AND DENTURE TEETH MARKET
-CAD/CAM SYSTEM MARKET
-CAD/CAM BLOCK AND PROSTHETIC MARKET
-INTRA-ORAL DIGITAL IMPRESSION-TAKING SYSTEM MARKET
- RAPID PROTOTYPING SYSTEM MARKET
-Dental Prosthetics Market
-CAD/CAM System and Rapid Prototyping Markets

Reasons To Buy:

This report analyzes and evaluates the current state of the market including existing and potential markets, product average selling prices, and unit volumes. The report also highlights the opportunities and potential hazards involved, and presents strategies for successfully navigating the market landscape. Furthermore, it seeks to identify the trends and technologies that will affect the future of each market segment and prepares an unbiased critical assessment of such market drivers and limiters based on our "ground up" approach, which includes primary and secondary research methods.
TABLE OF CONTENTS I
LIST OF FIGURES IX
LIST OF CHARTS XIII

EXECUTIVE SUMMARY 1

1.1 U.S. MARKET FOR DENTAL PROSTHETICS 1
1.2 GROWTH TRENDS BY SEGMENT 2
1.3 CROWN AND BRIDGE MARKET 3
1.4 INLAY/ONLAY MARKET 4
1.5 VENEER MARKET 5
1.6 DENTURE AND DENTURE TEETH MARKET 6
1.7 CAD/CAM SYSTEM MARKET 7
1.8 CAD/CAM BLOCK AND PROSTHETIC MARKET 8
1.9 INTRA-ORAL DIGITAL IMPRESSION-TAKING SYSTEM MARKET 9
1.10 RAPID PROTOTYPING SYSTEM MARKET 10
1.11 COMPETITIVE ANALYSIS 11
1.11.1 Dental Prosthetics Market 11
1.11.2 CAD/CAM System and Rapid Prototyping Markets 12

RESEARCH METHODOLOGY 13

2.1 RESEARCH SCOPE 13
2.2 IDATA'S 9-STEP METHODOLOGY 13
Step 1: Project Initiation & Team Selection 14
Step 2: Prepare Data Systems and Perform Secondary Research 16
Step 3: Preparation for Interviews & Questionnaire Design 17
Step 4: Performing Primary Research 18
Step 5: Research Analysis: Establishing Baseline Estimates 20
Step 6: Market Forecast and Analysis 21
Step 7: Identify Strategic Opportunities 23
Step 8: Final Review and Market Release 24
Step 9: Customer Feedback and Market Monitoring 24

U.S. DENTAL PROSTHETICS MARKET OVERVIEW 25

3.1 INTRODUCTION 25
3.1.1 Dental Health Statistics in the United States 25
3.1.2 Crowns and Bridges 28
3.1.2.1 Crowns 28
3.1.2.2 Bridges 28
3.1.2.3 Material Types 28
3.1.3 Inlays and Onlays 29
3.1.3.1 Material Types 29
3.1.4 Veneers 30
3.1.4.1 Material Types 30
3.1.5 Dentures 31
3.1.5.1 Full Dentures 31
3.1.5.2 Partial Dentures 31
3.1.6 Manufacturing Process and Technological Developments 31
3.1.6.1 Conventional Fabrication 31
3.1.6.2 CAD/CAM Technology 32
3.1.6.3 Intra-Oral Digital Impression-Taking 32
3.1.6.4 Rapid Prototyping 33
3.2 MARKET OVERVIEW 34
3.3 TREND ANALYSIS 37
3.4 DRIVERS AND LIMITERS 39
3.4.1 Market Drivers 39
3.4.2 Market Limiters 40
3.5 COMPETITIVE ANALYSIS 42
3.6 DENTAL LABORATORY INDUSTRY 45
3.7 MERGERS, ACQUISITIONS AND PARTNERSHIPS 46
3.7.1 Dental Prosthetics Market 46
3.7.2 CAD/CAM System Market 46
3.7.3 Intra-Oral Digital Impression-Taking System Market 48
3.7.4 Rapid Prototyping System Market 49

CROWN AND BRIDGE MARKET 51

4.1 INTRODUCTION 51
4.1.1 Crowns 51
4.1.2 Bridges 51
4.2 MARKET OVERVIEW 52
4.3 MARKET ANALYSIS AND FORECAST 55
4.3.1 Total Crown and Bridge Market 55
4.3.2 Total Crown Market 57
4.3.3 Total Bridge Market 59
4.3.4 Total Crown and Bridge Units Sold by Material Type 61
4.3.5 Total Full-Cast Crown and Bridge Market 64
4.3.5.1 Full-Cast Crown Market 66
4.3.5.2 Full-Cast Bridge Market 68
4.3.6 Total All-Ceramic Crown and Bridge Market 70
4.3.6.1 All-Ceramic Crown Market 72
4.3.6.2 All-Ceramic Bridge Market 74
4.3.7 Total Zirconia Crown and Bridge Market 76
4.3.7.1 Layered Zirconia Crown and Bridge Market 78
4.3.7.2 Monolithic Zirconia Crown and Bridge Market 81
4.3.8 All-Ceramic Glass Ceramic Crown and Bridge Market 84
4.3.8.1 Layered Glass Ceramic Crown and Bridge Market 86
4.3.8.2 Monolithic Glass Ceramic Crown and Bridge Market 89
4.3.8.3 All-Ceramics - Other Ceramics 92
4.3.9 Total Non-Precious PFM Crown and Bridge Market 96
4.3.9.1 Non-Precious PFM Crown Market 98
4.3.9.2 Non-Precious PFM Bridge Market 100
4.3.10 Total Semi-Precious PFM Crown and Bridge Market 102
4.3.10.1 Semi-Precious PFM Crown Market 104
4.3.10.2 Semi-Precious PFM Bridge Market 106
4.3.11 Total Precious PFM Crown and Bridge Market 108
4.3.11.1 Precious PFM Crown Market 110
4.3.11.2 Precious PFM Bridge Market 112
4.4 DRIVERS AND LIMITERS 114
4.4.1 Market Drivers 114
4.4.2 Market Limiters 115
4.5 COMPETITIVE ANALYSIS 117

INLAY AND ONLAY MARKET 119

5.1 INTRODUCTION 119
5.2 MARKET ANALYSIS AND FORECAST 120
5.2.1 Total Inlay and Onlay Market 120
5.3 INLAYS AND ONLAY MARKET BY MATERIAL TYPE 122
5.3.1 Gold Inlays and Onlays 122
5.3.2 Porcelain Inlays and Onlays 122
5.3.3 Composite Resin Inlays and Onlays 122
5.4 DRIVERS AND LIMITERS 125
5.4.1 Market Drivers 125
5.4.2 Market Limiters 125
5.5 COMPETITIVE ANALYSIS 127

VENEER MARKET 129

6.1 INTRODUCTION 129
6.2 MARKET ANALYSIS AND FORECAST 129
6.2.1 Total Veneer Market 129
6.3 UNITS SOLD BY MATERIAL TYPE 132
6.3.1 Porcelain Veneers 132
6.3.2 Composite Resin Veneers 132
6.4 DRIVERS AND LIMITERS 135
6.4.1 Market Drivers 135
6.4.2 Market Limiters 135
6.5 COMPETITIVE ANALYSIS 137

DENTURE AND DENTURE TEETH MARKET 139

7.1 INTRODUCTION 139
7.2 MARKET OVERVIEW 140
7.3 MARKET ANALYSIS AND FORECAST 143
7.3.1 Total Denture Market 143
7.3.1.1 Full Denture Market 145
7.3.1.2 Partial Denture Market 145
7.3.2 Denture Teeth Market 148
7.3.2.1 Units Sold by Material Type 150
7.4 DRIVERS AND LIMITERS 153
7.4.1 Market Drivers 153
7.4.2 Market Limiters 154
7.5 COMPETITIVE ANALYSIS 155
7.5.1 Denture Market 155
7.5.2 Denture Teeth Market 157
7.6 TECHNOLOGICAL ADVANCES 160
7.6.1 Digitized Dentures 160

CAD/CAM SYSTEM MARKET 161

8.1 INTRODUCTION 161
8.1.1 Full In-Lab Systems 161
8.1.2 Standalone Desktop Scanners 162
8.1.3 Chairside Systems 162
8.1.4 System Architecture 162
8.1.5 Manufacturing Flexibility 163
8.2 MARKET OVERVIEW 164
8.3 MARKET ANALYSIS AND FORECAST 167
8.3.1 Total CAD/CAM System Market 167
8.3.2 Full In-Lab System Market 169
8.3.3 Standalone Desktop Scanner Market 171
8.3.4 Chairside System Market 173
8.4 DRIVERS AND LIMITERS 175
8.4.1 Market Drivers 175
8.4.2 Market Limiters 176
8.5 COMPETITIVE ANALYSIS 179

CAD/CAM BLOCK AND PROSTHETIC MARKET 187

9.1 INTRODUCTION 187
9.2 MARKET ANALYSIS AND FORECAST 188
9.2.1 CAD/CAM Block Market 188
9.2.2 CAD/CAM Block Market by Material Type 190
9.2.2.1 Zirconia CAD/CAM Blocks 190
9.2.2.2 Porcelain CAD/CAM Blocks 190
9.2.2.3 Acrylic/Composite CAD/CAM Blocks 191
9.2.2.4 Metal CAD/CAM Blocks 191
9.2.3 Total CAD/CAM Prosthetic Market 194
9.2.3.1 Chairside CAD/CAM Prosthetic Market 196
9.2.3.2 In-Lab CAD/CAM Prosthetic Market 198
9.2.3.3 CAD/CAM Block Units Sold Versus CAD/CAM Prosthetic Units Sold 200
9.2.3.4 CAD/CAM Prosthetic Penetration Rate 201
9.3 DRIVERS AND LIMITERS 203
9.3.1 Market Drivers 203
9.3.2 Market Limiters 204
9.4 COMPETITIVE ANALYSIS 205
9.4.1 CAD/CAM Block Market 205

INTRA-ORAL DIGITAL IMPRESSION-TAKING SYSTEM MARKET 209

10.1 INTRODUCTION 209
10.2 MARKET ANALYSIS AND FORECAST 211
10.3 DRIVERS AND LIMITERS 213
10.3.1 Market Drivers 213
10.3.2 Market Limiters 214
10.4 COMPETITIVE ANALYSIS 216
10.5 NEW PRODUCTS AND DEVELOPMENTS 219

RAPID PROTOTYPING SYSTEM MARKET 221

11.1 INTRODUCTION 221
11.2 MARKET ANALYSIS AND FORECAST 222
11.3 DRIVERS AND LIMITERS 224
11.3.1 Market Drivers 224
11.3.2 Market Limiters 224
11.4 COMPETITIVE ANALYSIS 227

ABBREVIATIONS 231


To order this report: U.S. Market for Dental Prosthetics and CAD/CAM Devices
http://www.reportlinker.com/p01093082/US-Market-for-Dental-Prosthetics-and-CAD/CAM-Devices.html



__________________________
Contact Clare: clare@reportlinker.com
US: (339)-368-6001
Intl: +1 339-368-6001

©2012 PR Newswire. All Rights Reserved.

Powered by WorldNow